Bikemonger says.... We assemble these ourselves using brakes from TRP and the Gevenalle Conversion Kits so delivery may take a little longer than usual. If you're in the UK delivery should still be within a week of ordering. Currently post/is mount only. The flat mount version should be available mid-May 2021
Gevenalle says..... Our CXH units combine the advanced CX shifting capability with the confidence inspiring and one finger braking and modulation of hydraulic braking. We build these up using TRP’s Hylex brake system (you won’t find better – just more expensive) more info below. It just does not get better than this! Sold in pairs.
Ships with 160 front /140 rear rotors. Rotors are 6 bolt.
More about the CXH
When it came to hydraulic and disc brakes for cross we were hold outs for sure! To offer a hydraulic system we had to be convinced and the TRP Hylex has proven itself over and over. TRP is a small company compared to the likes of Shimano and SRAM but they also specialize in braking unlike the big guys and it shows! TRP Hylex are just a better brake and that is why they are used to build this system.
The master cylinders for this system are self contained units that are nestled inside the brake lever bodies. If you should crash out a lever chances are the master cylinder will be undamaged. This makes so much sense we just can’t comprehend why the other companies don’t offer the same level of design. With this in mind we are able to provide a crash service of just $74 per side. No matter how badly you crash, smash, wallop and destroy these units we will get you up and running again for a maximum of $74. That covers the whole unit right down to the caliper.
Running 10 speed now but might upgrade your drivetrain to 11 speed down the road? No worries as this system is part of our CX shifting system the shift levers can be swapped out to do just that!